2011 John Deere 640 Drapper

<< Back to 2011 John Deere Agriculture

2011 John Deere 640 Drapper

600D Draper Platforms are available in 25-, 30-, 35- and 40-foot configurations. All three provide excellent harvesting productivity in small grain and rice crops.

Features

All

Windrowing capability with 600D Drapers

Double-cut knife system produces a cleaner cut

Cutterbar full-width skid shoes protect bottom of platform

Maintain excellent visibility to cutterbar while tilting it

Large center feed drum improves feeding of crop into combine feederhouse

HydraFloat™ integrated suspension system improves ground following

Dual-knife drive system is timed

Perma-Glide™ divider points and end shields lift and separate standing or down crop

Reel resume and reverse are updated features on 600D Drapers

Takes only one person to convert draper from field to transport in a few minutes, without use of tools

Contour-Master™ enhances 600D HydraFloat™ performance

Two-piece reel design enhances smooth, fast draper feeding in all crop conditions

2011 John Deere 640 Drapper

Specifications

Engine

Manufacturer
John Deere

Dimensions

Hydraulics
{Pickup Reel} Height control
Speed control
Speed
{Draper Belts} (Operating) Side belts: variable up to 735 ft/min (223m/min); Center belts: 695 ft/min (212 m/min); Center belt not included with SPW configuration
(control) Hydraulic from cab
Tilt
(Counterbar) Base hydraulic (9 degrees tilt max)
Reach
{Feed Drum} (Finger) 6-in (152mm)
Speeds
{Pickup Reel} (Operating) 6 rpm to 54 rpm
Knife
(drive) Dual knife base
Height
(Clean) {Draper Belts} 1 in. Cleats (25.4 mm)
Length
{Cutterbar} 40.5-ft (12.34m)
Length
(Platform) 42.9 ft (13.08 m)
Width
{Draper Belts} Side belts 40 in. (1016 mm); Center belts 55 in. (1397 mm); Center belt not included with SPW configuration
Weight
(Approximate) (with transport) 8746 lb (3967kg) Combine Only; 7423 lb (3367kg) SPW Only
Cutterbar type
Straight line knife drive system
Drum Diameter
{Feed} 16 in. (406mm); Feed drum not included with SPW configuration
Transport Width
(field position) 42.5 ft (12.95 m)
(on wheel, less dividers) 8.9 ft (2.71 m)
Transport Length
(hitch extended) 50.4 ft (15.36 m)
Depth
(Overall operating) 8.2 ft (2.5 m)
Knife speed
520 cycles/min
Reel
(lift) 13.0 in. (330mm) Cylinder Stroke; 15.4 in. (391.5 mm) Total Range
(fore and aft) 14.1 in. (359 mm) Cylinder Stroke; 24.4 in (620 mm) Total Range
(resume) Base
(reverse) Base
Diameter
{Pickup Reel} 42 in. (1067 mm)

General Information

Pickup
{Reel} (Number of slats) 6 Bat Poly Base
(Fingers) Nylon
Header
{Height Sensing} (Type) Electro-Hydraulic base
(Header height sensing on the ground) Base
(Header height sensing off the ground) Base
Number of
(fingers) {Feed Drum} 18
(Feed drum fingers) Heavy-duty round 5/8 in. (16 mm) diameter with breakaway notch and retainer
Auger
(finger platform) {Feed Drum} Dual Chevron, retracting
Belt
{Draper Belts} (Center belt reverse) Base; Center belt not included with SPW configuration
Model #
640D
Base
{Feed Drum} Drum/auger reverse
Center clean out door
Operating System
{Feed Drum} (speed) 196 rpm

Photos

Request a quote for: 2011 John Deere 640 Drapper

Estimated Time For Purchase:*
If you see this field, leave it blank:
Characters Remaining

While we attempt to ensure display of current and accurate data, this listing may not reflect the most recent transactions or may reflect occasional data entry errors. All inventory listed is subject to availability and prior sale. Please consult dealership personnel for details. Prices are quoted for the US only and may not include dealer preparation, transportation, taxes, or other applicable charges. Photographs may be representative only and may vary somewhat from the actual items offered for sale.